Search This Blog

Monday 7 February 2022

Chemistry For Class IX (New Book ) - Chapter No. 8-Chemical Reactivity - Short Questions And Answers

GO TO INDEX

Chapter No.8-Chemical Reactivity
Short Questions And Answers


SECTION- B: SHORT QUESTIONS:

1. Identify the elements as Metals, Non-metals and Metalloids from the following elements:-
Elements Metals Non-Metals Metalloids
 C, Ca, Sb, S, Sr, Si, K, R Ba, Ge
Ca (Calcium),
Sr,
 K (Potassium),
Ba (Barium)

C (carbon),
S (Sulphur),
 R
Sb (Antimony),
Si (Silicon),
Ge (Germanium)


2. What are Alkali metals? Write names and symbols of alkali metals?
Ans: ALKALI METALS:
  • Elements of group IA are called Alkali metals. This group also called lithium family.
  • Their Valence shell contain one electron
  • The electronic configuration of alkali metals is ns1.
  • On reaction they lose one electron and form univalent (momovalent) positive ion. e.g. Li+, Na+, K+, Rb+, Cs+
  • They are highly reactive metals.
  • They have low melting point.

Names Of Alkali Metals With Symbols:
This group includes:
  • Lithium (Li)
  • Sodium (Na)
  • Potassium (K)
  • Rubidium (Rb)
  • Cesium (Cs) and
  • Francium (Fr).

3. What are Alkaline Earth Metals? Write names and symbols of Alkaline earth metals?
Ans: ALKALINE EARTH METALS:
  • Elements of group II A are called Alkaline earth metals. This group also called Beryllium family.
  • Their valance shell contain two electrons.
  • Their electronic configuration of alkaline earth metals is ns2
  • On reaction they lose two electrons and form divalent positive ions. e.g. Be+2, Mg+2, Ca+2, Sr+2, Ba+2, Ra+2
  • They show irregular Density, Melting and Boiling point.

Names Of Alkaline Earth Metals With Symbols:
This group includes:
  • Beryllium (Be)
  • Magnesium (Mg)
  • Calcium (Ca)
  • Strontium (Sr)
  • Barium (Ba)
  • Radium (Ra)

4. What are Halogens? Write names and symbols of Halogens?
Ans: HALOGENS:
  • Halogen belongs to VII-A group
  • Halogens exist in Molecular form.
  • The reactivity of halogens decreases down the group because atomic size increases and electro negativity decreases down the group. Their valance shell contain seven electron. So they gain one electrons and form monovalent anion.
    Example:
    Cl+ e- → Cl-

Members Of Halogens Group:
  • It consists of Fluorine (F), Chlorine (Cl), Bromine (Br), Iodine (I) and Astatine (At).
  • Except Astatine (metalloid) all halogens are non-metals.
  • Fluorine (F) and Chlorine (Cl) are gases, Bromine (Br) is liquid and Iodine (I) is solid at room temperature.

5. Write names and symbols of any three metalloids.
Ans: Metalloid With Their Symbols:
  1. Boron (B),
  2. Silicon (Si),
  3. Germanium (Ge),
  4. Arsenic (As),
  5. Antimony (Sb),
  6. Tellurium (Te),
  7. Polonium (Po) and
  8. Astatine (At)
(Note: write down any three names as mentioned in question)

6. Define following with examples:
1. Cation
2. Anion

Ans: CATIONS:
When an atom or a molecule loses electron then it changes into positively charged ion. These positive ions move towards cathode during electrolysis so they are termed as Cation.
x → x+ + e-
Example:
  • Group I A (Alkali Earth Metal) or Lithium Family lose one electron and form monovalent cation. e.g. Li+ , Na+ , K+ etc.
  • Group II A(Alkaline Earth Metals) or Beryllium Family lose two electron and form divalent cation. e.g. Ca2+, Mg2+ etc.
  • Group III A metals lose three electron and form trivalent cation. e.g: B3+, Al3+ etc

ANIONS:
When an atom or a molecule accept or gain electron then it changes into negatively charged ions. These negative ions move towards anode during electrolysis so they are termed as anions.
x + e- → x-
The number of negative charges on anion shows the excess number of electrons as compared to number of protons.
Example:
  • Group VII A(Halogen Family) accept one electrons and form monovalent anion. e.g.
    Cl+ e- → Cl-
  • Group VI A (Oxygen Family) accept two electrons and form divalent anion. e.g. O2-, S2-

7. Explain why alkali metals do not exists free in nature? OR Analyze why alkali metals are not found in the free state in nature.
Ans: ALKALI MATELS DO NOT EXIST FREE IN NATURE:
Group I A elements are alkali metals. Alkali matels are electro positive and electro positive character of metals increases down the group with increasing atomic size.
Alkali metals have large atomic size and low ionization potential (ionization energy) values. The nucleus force on valence shell is very weak so they can lose their valence electron easily. Hence they are highly reactive, highly electro positive, powerful reducing agents and cannot exist free in nature.
Example:
Al ⟶ Al3+ + 3e-

8. Explain inertness of noble metals.
Ans: Inertness of Noble Metal:
Nobel metals are less electro positive so they are difficult to oxidize. They are placed in the zero group of periodic table. Their electronic configuration is ns2p6. Therefore they show no reaction with atmospheric gases and resist corrosion. This helps noble metals to maintain their appearance.
Due to inertness, noble metals like Ag, Au, Pt are used to make ornaments.

9. Write names and symbols of some noble metals.
Ans: Names Of Noble Metals With Symbols:
Words Meanings
Gold (Aurum)Au
Silver (Argentum)Ag
PlatinumPt
IridiumIr
OsmiumOs
RhodiumRh
RutheniumRu
PalladiumPd


10. Explain electronegative character of non-metals.
Ans: ELECTRONEGATIVE CHARACTERS OF NON-METALS:
A Non-metal has property to accept electron easily and form Anion. It is called electronegative character.
x + e- → x-
Electronegative character increases across the period because Atomic size decreases and nuclear charge density increases. It decreases down the group due to increasing Atomic size.
Example:
Halogens accept electrons easily due to their high electronegative character.
Cl+ e- → Cl-

Test Your self

1. Which metal is found in liquid state? Write down its position, properties and uses?
Ans: LIQUID METAL:
Mercury is the only metal found in liquid state at normal temperatures.
Position: It belongs to sixth period and III B group of modern periodic table.
Properties: It has lowest melting point among all metals.
Uses:
  • It forms alloys with other metals which are known as amalgam.
    For example,
    (i) Tin amalgam is an alloy of tin and mercury.
    (ii) Its alloy with silver and tin is used as dental filling.
  • Mercury is used in thermometer and barometer.
  • Gaseous mercury is used in street light and fluorescence lamps.

2. Identify the alkaline earth metals from the following elements.
Bi, Br, Ba, B, Se, Si, Sb, Sr

Ans: Alkaline Earth Metals are:
  • Ba (Barium)
  • Sr (Strontium)
(As elements of group II A are alkaline earth metals.)

3. Write few properties of metals.
Ans: Properties Of Metals:
  • The element which readily loses electron in reaction and easily form cation is termed as metal.
  • A metal structure consists of metal ions joined by metallic bonds.
  • Metals are good conductors of heat and electricity.
  • They are Ductile, Strong, Lustrous, Malleable and Sonorous.
  • Metals has low electro-negativity.
  • They have high melting points.
  • They are solid.
  • Oxides of metals are basic in nature e.g. (Li2O, Na2O2 ,KO2 ,MgO).

4. Write some properties of non-metals.
Ans: Properties Of Non-Metals:
  • Non-metals are the elements which have greater tendency to accept or gain electron in reaction and form anion are termed as non-metals."
  • They are poor or nonconductors of heat and electricity.
  • Non-metals are non malleable; non ductile, dull in appearance, non-sonorous.
  • Non-Metals has high electro-negativity.
  • They have low melting point.
  • They are solids and gases. Bromine (Br) is the only non-metal found in liquid state.
  • Oxides of non-metals are acidic in nature e.g. (CO2 , SO3 , NO2).

5. Write uses of baking soda, bleach and sodium nitrate.
Ans: Uses:
1. Baking Soda (Sodium bicarbonate NaHCO3):
Uses:
  • It is used in Baking Powder, Health Salt, Beverages.

2. Bleach (Sodium hypochlorite NaClO):
Uses:
  • It is used as a bleaching and disinfecting agent.
  • They are disinfectants for drinking water and waste water purification systems and swimming pools.

3. Chile saltpeter (sodium nitrate NaNO3):
Uses:
  • It is used as fertilizer and in Dynamite.

6. Enlist the uses of magnesium.
Ans: Uses Of Magnesium:
  1. It is used in flares and photographic flash bulbs because it burns to produce brilliant white light.
  2. Magnesium hydroxide are used as an Antacid.
  3. It is used for manufacturing of Mobile Phones, Laptop and Tablet Computers because of light weight and electrical properties.
  4. The use of Magnesium reduces the weight of vehicle by replacing steel components of a vehicle.
  5. Magnesium alloys are used in aviation industry, space crafts and missile because they are light weight and remain stable at high temperature.
  6. Magnesium can be changed into intricate (twisters, knotty) shapes, so it is used in tennis, rackets and handles of archery bows.
  7. Magnesium is used in cathodic protection (CP) to protect underground pipeline from corrosion.

7. Write uses of Slaked lime, Gypsum and calcium tungsten.
Ans: Uses:
1. Slaked lime ( Calcium hydroxide Ca(OH)2):
Uses:
  • As soil conditioner, it is used in water treatment to reduce acidity.
  • It is also used in steel industry to remove impurities from Iron ore.

2. Gypsum (Calcium sulphate dihydrate 2CaSO4.H2O):
Uses:
  • It is used as component in construction of buildings.
  • It is used medically in plaster for setting broken bones.

3. Calcium tungsten CaWO4:
Uses:
  • It is used in Luminous paints.

8. Define Soft metals with examples.
Ans: Soft Metals:
The metals which are scratched easily are called soft metals.
Example: Alkali metals like; Sodium(Na), Potassium (K) and Rubidium (Rb) are soft metals.

9. Define hard metals with examples.
Ans: Hard Metals:
Metals which show strong resistance towards scratching are called hard metals.
Example: Nickle (Ni), Iron (Fe), Tungsten(W) are hard metals.

10. Write melting point, boiling point, density and moh values of sodium and iron.
Ans: Melting point, Boiling point, Density and Moh values of Sodium and Iron
Sodium Iron
 Melting Point98 °C1535 °C
 Boiling Point890 °C2450 °C
 Density0.971 g/cm37.87 g/cm3
 Moh Value0.54.5


11. Write names and symbols of few noble metals?
Ans: See above Section "B" Q.9.

12. Why helmets of astronauts are coated with thin film of gold?
Ans: See below in Scientific Reasons, Q.2.

13. Why glass surface are coated with gold?
Ans: See below in Scientific Reasons, Q.3.

14. Why gold is used in jewelry?
Ans: It is used in Jewellery because it has very high luster, yellow colour and tarnish resistance.

15. Why platinum is used as catalytic converter in vehicles?
Ans: It is used as catalytic converter in vehicles. It helps the complete combustion of Hydrocarbons and reduces the emission of air pollutants.

16. Identify the VIII A group elements from the following:
N, Na, Ni, Ne, Ar, At, He.

Ans: VIII A Group Elements:
VIII A group elements are noble gases. These are:
  • Ne (Neon)
  • Ar (Argon)
  • He (Helium)

17. Write names and symbols of Non metals of VA group elements.
Ans: Non-Metals VA Group Elements:
Non metals of VA group elements are:
  • Nitrogen (N)
  • Phosphorous (P)

18. Which group contain non metals in gaseous state only?
Ans: VIIIA group contain non-metals in gaseous state only.

More Short Questions from Text Book

Q.1: Define chemical reactivity?
Ans: CHEMICAL REACTIVITY:
"The property of substance to undergo chemical reaction with any material is called chemical reactivity."
Reactivity of metals depends upon its tendency to lose electron and that of non metals depends upon its tendency to accept electron.
Matter which undergoes chemical reactivity may be element, compound or mixture.

Example:
Medicines, plastics, glass, detergents etc are the products of chemical reactivity.

Q.2: Name three most abundant elements found in air, earth’s crust, Universe and Human Body.
Ans: IN AIR:
Most abundant elements found in air are:
  1. Nitrogen (N)
  2. Oxygen(O)
  3. Argon (Ar)

IN EARTH"S CRUST:
Most abundant elements found in earth’s crust are:
  1. Oxygen (O)
  2. Silicon (Si)
  3. Aluminum (Al)

IN UNIVERSE:
Most abundant elements found in Universe are:
  1. Hydrogen
  2. Helium
  3. Oxygen

IN HUMAN BODY:
Most abundant elements found in Human Body are:
  1. Oxygen
  2. Carbon
  3. Hydrogen

Q.3: How can Alkali and Alkaline earth metals be identified?
Ans: IDENTIFICATION OF ALKALI AND ALKALINE METALS:
Alkali and Alkaline earth metals can be identified by the flame test. On burning they produce coloured flames.
Elements Symbols Colour of Flame
LithiumLi Bright Crimson (Bright Red)
SodiumNa Golden Yellow
PotassiumK Violet
RubidiumRb Lilac (Dark Red)
CesiumCs Bright Blue
BerylliumBe White
MagnesiumMg Bright White
CalciumCa Brick Red
StrontiumSr Crimson Red
BariumBa Green


Q.4: Name some common compounds of Sodium with their chemical names, formula and uses?
Ans: Some common compounds of Sodium with their formula and uses are mentioned below:
Common Name Chemical name Formula Uses
 Soda Ash Sodium carbonateNa2CO3 Used as water softener.
 Baking Soda Sodium  bicarbonateNaHCO3 Used in Baking Powder, Health Salt, Beverages.
 Table Salt Sodium chlorideNaCl Food Items.
 Chile saltpeter Sodium NitrateNaNO3 Used as fertilizer and in Dynamite.


Q.5: Name some common compounds of calcium with their chemical names, formula and uses?
Ans: Some common compounds of Calcium with their formula and uses are mentioned below:
Common Name Chemical name Formula Uses
 Slaked lime Calcium hydroxideCa(OH)2: As soil conditioner, used in water treatment to reduce acidity.
Used in steel industry to remove impurities from Iron ore.
 Gypsum Calcium sulphate dihydrate2CaSO4.H2O It is used as component in construction of buildings.
It is used medically in plaster for setting broken bones.
 Bleaching Powder, Calcium hypochloriteCa(OCl)2 It is used for sterilization of water in swimming pool.
 Calcium tungsten Calcium tungstenCaWO4 It is used in Luminous paints.
 Limestone Calcium carbonateCaCO3 As source of CO2, In Cement industry.


Q.6: What is “Calcium Light”?
Ans: CALCIUM LIGHT:
In past, musical halls, theaters stages, were lit by chemical called lime (CaO), using Oxy-Hydrogen flame. As a result bright light was produced also known as Calcium light.
Uses: This light increases the visibility of audience to enjoy the performance of Actor on stage.

Q.7: What is hardness of metal? Define soft and hard metals? Also write down the value of hardness of following metals on moh scale: Lithium, Sodium, Potassium, Rubidium, Iron and Tungsten.
Ans: HARDNESS OF METALS:
Metals may be soft or hard. The hardness of metal is the resistance of metal to be scratched.
Measurement of Hardness:
Hardness of metals and other material is measured by Moh scale.
Moh Scale is devised by Frederich Mohs in 1812. It is based on scratch resistance of different metals and other materials.
Example:
Hardness of plastic, Lead pencil is 1, and that of Diamond is 10 on Moh scale.

Values of Hardness of few metals on Moh scale
Metals Moh Scale Value
Lithium (Li)0.8
Sodium (Na)0.5
Potassium (K)0.4
Rubidium (Rb)0.3
Cesium (Cs)0.2
Nickel (Ni)4
Iron (Fe)4.5
Tungsten (W)7.5


Q.8: Define amalgam with examples?
Ans: AMALGAM:
Mercury forms alloys with other metals which are known as amalgam.
For example,
  • Tin amalgam is an alloy of tin and mercury.
  • Its alloy with silver and tin is used as dental filling.


Q.9: How acid rain is caused?
Ans:ACID RAIN:
Non-metals form acidic oxides which react with water vapors of atmosphere and cause acid rain.
SO2 + H2O → H2SO3 Sulphurous Acid
SO3 + H2O → H2SO4 Sulphuric Acid
CO2 + H2O → H2CO3 Carbonic Acid

Q.10: How can artificial rain occur?
Ans: ARTIFICIAL RAIN:
Artificial Rain can occur through cloud seeding.
Dr. Vincent J. Schaefer in 1946 successfully created artificial clouds in a chilled chamber.
  1. In this process chemicals like Silver Iodide (AgI) or Dry ice (Solid CO2) are spread over clouds.
  2.  As a result a super cooled water molecule condenses rapidly around these chemicals and forms ice crystals.
  3. When these ice crystals grow big and become too heavy then they fell downward and change into rain.


Q.11: How does enamel prevents tooth from decay?
Ans: ENAMEL PROTECT TOOTH:
Enamel is the outer layer of our teeth it is mainly composed of calcium carbonate (CaCO3) and hydroxy apatite [Ca3(PO4)2] . Ca(OH)2.
Fluoride (F) ions of toothpaste replaces hydroxide (OH-) ions of hydroxy apatite and form flouro apatite. This replacement makes enamel more resistant against tooth decay.

Differences

Q.12: Differentiate between:
  • Metals, non-metals and metalloids.
  • Reactivity of Alkali and Alkaline Earth Metals
Ans: 1-Difference Between Metal, Non-Metal and Metalloid.

METALS NON-METALS METALLOIDS
 Tend to lose electrons in reactions. Tend to gain electrons in reactions with metals. Intermediate properties of metals and non-metals
 They form cations They form anions -
 They are solids with high melting point. They are gases or solids with low melting point. -
 Good conductors of heat and electricity. Poor-conductors of heat and electricity -
 Ductile Not ductile -
 Lustrous Often have dull appearance -
 Malleable Non-malleable -
 Sonorous Non- sonorous _
 Metals has low electro-negativity Non-Metals has high electro-negativity -
 Oxides of metals are basic in nature.
 e.g. (Li2O, Na2O2 ,KO2 ,MgO).
 Oxides of non-metals are acidic in nature.
e.g. (CO2 , SO3 , NO2).
 Oxides of metalloids may be acidic (B2O3 , SiO2) or amphoteric (AS2O3).
 Example:
  • All B group elements (Transition Metals). e.g Iron (Fe), Copper (Cu) etc,
  • Group I A (Alkali metals). e.g: Li, Na, K etc.
  • Group II A (Alkaline earth metal)s. e.g Be, Mg, Ca (Calcium) etc.
 Example:
  • H (Hydrogen), N (Nitrogen), O(Oxygen), F(Fluorine), Cl (Chlorine) and VIII A group non-metals are gases.
  • Bromine (Br) is the only non-metal found in liquid state.
  • S (Sulphur), P (Phosphorus), Se (Selenium), I (Iodine) are solids.
 Example:
Boron (B), Silicon (Si), Germanium (Ge), Arsenic (As), Antimony (Sb), Tellurium (Te), Polonium (Po) and Astatine (At) are metalloids.


Comparison Of Reactivity Of Alkali And Alkaline Earth Metals
OR
Difference Between Alkali And Alkaline Earth Metals
S.NO. Alkali Metals (I A) Alkaline Earth Metals (II A)
1. They are highly reactive than (IIA) group elements due to low ionization energy. They are less reactive than (IA) group elements due to high ionization energy.
2. They form monovalent cation (M+) They form divalent cation (M2+)
3. They immediately tarnish in air and form metal oxide.
K + O2 ⟶ KO2
 They react with oxygen on heating.
2Mg + O ⟶ 2MgO
4. They react violently with halogens.
2Na + Cl ⟶ 2NaCl
 They react slowly with halogens.
Ca + Cl2 ⟶ CaCl2
5. They react with water vigorously at room temperature and form strong alkaline solution.
2K + 2H2O ⟶ 2KOH +H2
 They react with water less vigorously and form alkaline solution.
Mg + H2O ⟶ MgO+ H2
MgO + H2O ⟶ Mg(OH)2
4. Their oxides and hydroxides are more basic than those of II A group elements. Their oxides and hydroxides are less basic than those of IA group elements.
5. They do not form metal carbides. They form metal carbides on heating.
Ca + 2C ⟶ CaC2

Q.13: Show how cations and anions are related to the terms metals and non-metals.
Ans: CATIONS RELATED TO METALS:
Metals have low electro-negativity. So they can easily remove electron from their outermost (Valance) shell.
Such element which readily loses electron in reaction form cation and termed as metal.
Example:
  • All B group elements are metals and known as Transition Metals. e.g Iron (Fe), Copper (Cu), Zinc (Zn) etc.
  • Some elements of A group are also metals.
  • (i) Elements of group I A are called Alkali metals. e.g: Lithium (Li), Sodium (Na), Potassium (K), Rubidium (Rb), Cesium (Cs) and Francium (Fr). (ii) Elements of group II A are called Alkaline earth metals. e.g Beryllium (Be), Magnesium (Mg), Calcium (Ca), Strontium (Sr), Ba (Barium), Radium (Ra).

ANIONS RELATED TO NON-METALS:
Non-Metals have high electro-negativity. So the elements those have a greater tendency to accept or gain electron in reaction and form anion are termed as non-metals."
Examples:
  • Most of the non-metals are gases For example: H (Hydrogen), N (Nitrogen), O(Oxygen), F(Fluorine), Cl (Chlorine) and VIIIA group non-metals are gases.
  • Bromine (Br) is the only non-metal found in liquid state.
  • Some non metals like S (Sulphur), P (Phosphorus), Se (Selenium), I (Iodine) are solids.

Q.14: Name some elements, which are found in uncombined state in nature.
Ans: Elements of group VIII A are inert gases and are found in uncombined state in nature. This group includes:
Helium(He), Neon(Ne), Argon(Ar), Krypton (Kr) Xenon(Xe) and Radon(Rn)

Scientific Reason:

1. Why do Two pieces of pure un-coated metals permanently stuck together in space?
Ans: Reason:
Two pieces of pure un-coated metals permanently stuck together in space because there is no oxygen in space and hence no oxidation reaction occurs. The oxidized layer on metals serves as a barrier and prevent adherence of metals.

2. Why helmets of astronauts are coated with thin film of gold?
Ans: Reason:
The helmet of Astronaut is coated with thin film of gold which reflect intense Solar radiation and protect eyes, skin of astronaut.

3. Why glass surface are coated with gold?
Ans: Reason:
Glass surface coated with gold will reflect solar radiations outward and keep the Buildings cool in summer. It also reflects internal heat inward and keeps the Building warm in winter.




Islamiat (اسلامیات) For Class IX -New - Baab So'um: Mozuaati Mutalah - (ج) Siraat e Tayyabah - Khasa'il o Shama'il e Nabvi ( صَلَّی اللهُ عَلَیهِ وَّعَلٰٓی آلِہٖ وَ آصحَابِہٖ وَسَلِّمُ) - Short Question-Answers

باب سوم: موضوعاتی مطالعہ
(ج) سیرت طیبہ - 4- خصائل و شمائل نبوی صَلَّی اللهُ عَلَیهِ وَّعَلٰٓی آلِہٖ وَ آصحَابِہٖ وَسَلِّمُ
مختصر سوال و جواب





Islamiat (اسلامیات) For Class IX -New - Baab So'um: Mozuaati Mutalah - (ج) Siraat e Tayyabah - Khasa'il o Shama'il e Nabvi ( صَلَّی اللهُ عَلَیهِ وَّعَلٰٓی آلِہٖ وَ آصحَابِہٖ وَسَلِّمُ) - Detailed Question-Answers

باب سوم: موضوعاتی مطالعہ
(ج) سیرت طیبہ - 4- خصائل و شمائل نبوی صَلَّی اللهُ عَلَیهِ وَّعَلٰٓی آلِہٖ وَ آصحَابِہٖ وَسَلِّمُ
تفصیلی سوال و جواب





Islamiat (اسلامیات) For Class IX -New - Baab So'um: Mozuaati Mutalah - (ج) Siraat e Tayyabah - Khasa'il o Shama'il e Nabvi (صَلَّی اللهُ عَلَیهِ وَّعَلٰٓی آلِہٖ وَ آصحَابِہٖ وَسَلِّمُ) - Multiple Choice Questions (MCQs) کثیرالانتخابی سوالات

باب سوم: موضوعاتی مطالعہ
(ج) سیرت طیبہ - 4- خصائل و شمائل نبوی صَلَّی اللهُ عَلَیهِ وَّعَلٰٓی آلِہٖ وَ آصحَابِہٖ وَسَلِّمُ
کثیرالانتخابی سوالات



خالی جگہ پر کریں۔

  1. "خصائل" عربی کے لفظ "خصلۃ" سے ماخوذ ہے۔ جس کے معنی عادت (اچھی یا بری) ہے۔
  2.  "شمائل" "شمیئلہ" کی جمع ہے۔ جس کے معنی اچھی طبیعت، عمدہ عادت اور نیک صفت اور خصلت کے ہیں۔ 


Gravitation - Physics For Class IX (Science Group) - Multiple Choice Questions (MCQs) , Fill in the blanks and Concept Map

Go To Index

Physics For Class IX (Science Group)
UNIT 6: GRAVITATION
Multiple Choice Question


Section (A) Multiple Choice Questions (MCQs)

Tick mark (✓) the correct answer:
1. The motion of a falling ball towards Earth is due to the _____.
a) Weightlessness
b) Gravitational force ✓
c) Acceleration due to gravity
d) Both 'a' and 'b’

2. Newton's law of gravitation holds between every two objects on the _____.
a) on Earth
b) on Jupiter
c) on Moon
d) on Universe ✓

3. Numerical value of G is ______.
a) G = 6.673 10-11 Nm2 kg-2
b) G = 6.673 1011 Nm2 kg-2
c) G = 6.763 10-11 Nm2 kg-2
d) G = 6.763 1011 Nm2 kg-2

4. Gravitational field of Earth is directed _____.
a) towards the Earth ✓
b) towards the Sun
c) towards the Moon
d) away from Earth

5. ______ was the first scientist who gave the concept of gravitation.
a) Einstein
b) Newton ✓
c) Faraday
d) Maxwell

6. According to Newton's law of universal gravitation force ∝ _______.
a) m1 m2
b) 1/r2
c) r2
d) Both (a) and (b) ✓

7. Gravitational force is always ______.
a) Repulsive
b) Attractive ✓
c) Both
d) None of these

8.Numerical value of ______ remains constant every where.
a) g
b) G ✓
c) F
d) W

9. Gravitation force is ______ of the medium between the objects.
a) Dependent
b) Independent ✓
c) Both 'a' and 'b'
d) None of these

10. Near Earth's surface g = ______.
a) 10 ms-2
b) 1.6 ms-1
c) Both (a) and (b)
d) None of these

11. Newton's law of gravitation is consistent with Newton's _________ law of motion.
a) 1st
b) 2nd
c) 3rd
d) All of them

12. Spring balance is used to measure _________.
a) Mass
b) Weight ✓
c) Elasticity
d) Density

13. Your weight as measured on Earth will be _____.
a) Increased
b) Decreased ✓
c) Remains same
d) None of these

14. Mass of Earth is _____.
a) 6.0 x 1023 kg
b) 6.0 x 1024 kg ✓
c) 6.0 ´ 1025 kg
d) 6.0 ´ 1026 kg

15. _____ is a natural satellite.
a) Earth
b) Jupiter
c) Moon ✓
d) Mars

16. A communication satellite completes its one revolution around the Earth in ______ hours.
a) 6
b) 12
c) 18
d) 24 ✓

17. The velocity of a satellite is _____ of its mass.
a) Independent ✓
b) Dependent
c) Equal
d) Double

18. _______ are used to put satellites into orbits.
a) Helicopter
b) Aeroplane
c) Rocket ✓
d) None of these

19. The critical velocity vc = ______.
a) gR
b) g/R
c) √ gR
d) √ g/R

20. According to Newton's law of universal gravitation, force is inversely proportional to ____.
a) m1 m2
b) 1/r2
c) r2
d) Both (a) & (b)

21. According to Newton's law of universal gravitation, force ∝ to _____.
a) m1 m2
b) 1/m1 m2
c) r2
d) Both (a) & (c)

22. It changes the path of the Moon around the Earth.
a) centripetal force
b) centrifugal force
c) pull of the gravity ✓
d) turning effect of the force

23. It determines the gravitational force acting per unit mass:
a) G
b) g ✓
c) 𝜏
d) None of these

24. Gravitational force is always present between two objects because of their:
a) volumes
b) shapes
c) density
d) masses ✓

25. Gravitation force follows the:
a) direct square law
b) inverse square law ✓
c), direct law
d) inverse law

26. In 1798, he completed the 1st experiment that demonstrated Newton's Law of universal gravitation.
a) Einstein
b) Cavendish ✓
c) Faraday
d) Maxwell

27. Earth's field force is a:
a) non-contact force ✓
b) contact force
c) Both 'a' & 'b'
d) None of these

28. Weight is measure in:
a) kg
b) kg-m
c) kg/m
d) N ✓

29. Ocean tides are caused by the:
a) gravity of the earth
b) gravity of the sun
c) gravity of the moon
d) Both "b" & "c" ✓

30. The first artificial satellite, Sputnik-1, was sent into space by:
a) USA
b) USSR ✓
c) UK
d) China

31. The gravitational pull of the Earth on the satellite provides the needed to keep a satellite in orbit around some planet.
a) centripetal force ✓
b) centrifugal force
c) gravity
d) force of attraction

32. The height of a geostationary satellite is about ____ km from the surface of the Earth.
a) 32,000
b) 35,600
c) 40,800
d) 42,300 ✓

33. The time required for a satellite or complete one revolution around the Earth in its orbit is called its:
a) period
b) rotational period
c) time period ✓
d) revolving time

34. Expression for the mass of the Earth is:
a) gRE2 / G
b) gG / RE2
c) gG / RE
d) gRE / G

35. The velocity that a satellite must possess when orbiting around the Earth in an orbit of radius (r = R + h) is:
a) √ R + h / GM
b) √ M(R + h) / G
c) √ G(R + h) / M
d) √ GM / R + h

36. The expression for the time period of a satellite orbiting around the Earth is:
a) 2π √ r/GM
b) 2π √ r2/G2M
c) 2π √ r2/GM
d) 2π √ r2/GM2

37. Sun's gravitational attraction to the Earth is ____ times greater than that of the moon to the Earth.
a) 100
b) 156
c) 177 ✓
d) 189

38. The constant horizontal velocity required to put the satellite into a stable circular orbit around the Earth is called:
a) orbital velocity
b) critical velocity ✓
c) centripetal velocity
d) centrifugal velocity

39. Expression for critical velocity is:
a) √ gR
b) √ gME
(c) √ g(R + h)
(d) √ gGR

FILL IN THE BLANKS:

  1. Gravity’ is taken from Latin word ‘gravitas’ means ‘weight’.
  2. The gravitational force (pull) of Earth is known as gravity.
  3. Everybody in the universe attracts every other body with a gravitational force of magnitude:
    F = Gm1m2/ r2
  4. Gravitational force forms an action-reaction pair.
  5. Newton's law of gravitation is consistent with Newton's third law of motion.
  6. “G” has constant value through out the universe.
  7. “g” has different values at different places.
  8. A gravitational field is a region in which a mass is attracted due to gravitational attraction.
  9. Weight of an object is the gravitational pull of Earth acting on it.
  10. W = mg.
  11. Mass of Earth is 6.0 x 1024kg.
  12. A satellite is an object that revolves around a planet.
  13. Natural satellite is a planet that revolves around another planet naturally.
  14. Moon is natural satellite of Earth.
  15. An artificial satellite is an object which is sent to space to revolve around a planet.
  16. Sputnik-1 and Explorer-1 are artificial satellites.
  17. Meteosat are artificial satellites of Earth.
  18. Critical velocity is the constant horizontal velocity needed to put a satellite into an stable circular orbit around the Earth.
  19. “G” is also known as Newtonian constant of gravitation or the Cavendish gravitational constant.
  20. The gravitational field strength “g” is approximately 10 Newton per kilogram or 10 Nkg-1.
  21. An object of mass 1 kg has a weight of 9.8 N near the surface of Earth.
  22. British scientist George Atwood (1746-1807) used two masses suspended from a fixed pulley, to study the motion and measure the value of ‘g’. This is named as “Atwood Machine”.
  23. Ocean tides are caused by the gravity of Sun and Moon.
  24. The Earth has 9.3 times more mass than Mars.
  25. Earth is used for communication purpose, therefore it is known as “Communication Satellite”.
  26. Velocity of Geostationary satellite with respect to Earth is zero.
  27. The velocity required to keep the satellite into its orbit is called “Orbital Velocity”.

CONCEPT MAP




Acceleration due to gravity “g” at different planets
Planet Value of g ms-2
 Earth10
 Moon1.62
 Venus8.87
 Mars3.77
 Jupiter25.95
 Sun274
 Mercury3.59
 Saturn11.08
 Uranus10.67
 Neptune14.07


Mass and Radius of different planets.
Planet / Star Mass (Kg) Radius (m)
Sun1.99 x 10306.96 x 108
Moon7.35 x 10221.74 x 106
Mercury3.30 x 10232.44 x 106
Venus 4.87 x 10246.05 x 106
Earth5.97 x 10246.38 x 106
Mars6.42 x 10233.40 x 106
Jupiter1.90 x 10276.91 x 107
Saturn5.68 x 10266.03 x 107
Uranus8.68 x 10252.56 x 107
Neptune1.02 x 10262.48 x 107


Friday 4 February 2022

Forces And Matters - Physics For Class IX (Science Group) - Multiple Choice Questions (MCQs) , Fill in the blanks and Concept Map

Go To Index

Physics For Class IX (Science Group)
UNIT 5: FORCES AND MATTER
Multiple Choice Questions (MCQs) , Fill in the blanks and Concept  Map


Section (A) Multiple Choice Questions (MCQs)
Tick mark (✓) the correct answer:

1. The springs in brakes and clutches are used:
a) To restore original position ✓
b) To measure forces
c) To absorb shocks
d) To absorb strain energy

2. If the material recovers the original dimensions, when an external force is removed, this deformation is known as ______ deformation.
a) Inelastic
b) Permanent
c) Elastic ✓
d) Irreversible

3. Which of the following material is more elastic?
a) Rubber
b) Glass
c) Steel ✓
d) Wood

4. If a spring stretches easily then its spring constant has _____.
a) Large value
b) Small value ✓
c) Constant Value
d) Both (a) and (b)

5. What is the unit for the spring constant?
a) Nm
b) Nm-2
c) Nm-1
d) Nm2

6. The spring obeys Hooke's law for the earlier extensions and when the spring becomes damaged it does not appear to do so; Fig 5.12. Estimate, from graph, after addition of which weight the spring damaged.
a) 1.5 N
b) 8 N
c) 1.6 N ✓
d) 2.0 N


7. Which of the following is not a unit of pressure?
a) Pascal
b) Bar
c) Atmosphere
d) Newton ✓

8. If a metal block applies a force of 20 N on an area of 5 cm2. Find the pressure being applied by the block on the area of ____.
a) 100 Ncm-2
b) 0.8 Ncm-2
c) 0.25 Ncm-2
d) 4 Ncm-2

9. The Fig 5.13 shows a container with three spouts. The container is filled with water. Jets of water pour out of the spouts. Why does the jet of water from the bottom spout goes farthest out from the container?
a) Pressure decreases with depth.
b) Pressure increases with depth. ✓
c) More water available to flow out from the bottom.
d) Density of water different at different places.


10. When a force is exerted on an area, this is known as:
a) torque
b) pressure ✓
c) energy
d) equilibrium

11. Pressure = ___ :
a) torque / area
b) area / torque
c) area / force
d) force / area ✓

12. The length of spring increases as the force increases. This increase in length of spring is known as:
a) extension ✓
b) stretch
c) elasticity
d) expansion

13. Within elastic limit, the displacement produced in the spring is directly proportional to the:
a) increase in length
b) extension produced
c) force applied ✓
d) None of these

14. The equation for Hooke's law may by written as:
a) x = kF
b) F = kx ✓
c) x = k/F
d) F = k/x

15. 1 atmosphere = ___ :
a) 1.013 x 105 Pascal ✓
b) 1.013 x 105 Bar
c) 1.013 x 105 Newton
d) 1.013 x 105 Nm-1

16. In SI system, unit of pressure is:
a) Nm
b) Nm-2
c) Nm-1
d) Nm2

17. 1 Pascal (Pa) = _____ :
a) 1.013 x 105 Nm-2
b) 1.013 Nm-2
c) 10 Nm-2
d) 1 Nm--2

18. It is a collection of molecules that are randomly arranged and held together by weak cohesive forces and by forces exerted by the walls of a container.
a) A liquid
b) A gas
c) Both 'a' & 'b' ✓
d) None of them

19. The pressure exerted by fluids acts in:
a) one direction
b) two directions
c) up & down directions
d) all directions ✓

20. Pressure of a fluid P is proportional to the:
a) depth ✓
b) mass
c) force
d) None of them

21. It tells us how tightly matter is packed together.
a) Mass
b) Weight
c) Density ✓
d) Volume

22. The machines in which force is transmitted by liquids under pressure is known as:
a) liquid machines
b) fluid machines
c) pneumatic machines
d) hydraulic machine ✓

23. A hydraulic machine works on:
a) Newton's third law of motion
b) Newton's law of gravitation
c) Pascal's law ✓
d) Molecular theory

24. Forces on an object can cause:
a) tensile deformation (stretching)
b) compressive deformation (squashing)
c) Both 'a' & 'b' ✓
d) None of these

25. Pressure is greater when a large force acts on:
a) large area
b) small area ✓
c) cylindrical area
d) round area

26. The pressure in a fluid is greater with:
a) large depth and high density ✓
b) large depth and low density
c) the small depth and high density
d) small depth and low density

Fill In Blanks:

1. Forces on an object can cause tensile deformation (stretching) and compressive deformation (squashing).
2. An elastic change occurs when an object returns to its original shape and size after the load is removed.
3. An extension against load graph shows a body stretches when a load is applied to it.
4. Hooke’s Law states that "The extension in spring is proportional to the load applied to it, provided the limit of elasticity is not exceeded.
5. According to Hooke's law, F = kx
6. An extension against load graph is a straight line up to the limit of proportionality.
7. Pressure is greater when a large force acts on small area.
8. The pressure in a fluid is greater with large depth, and high density.
9. Pressure = depth x density x acceleration due to gravity.
10. P = dρg
11. Liquids transmit pressure equally in all directions. This is called Pascal’s law.
12. The machine in which force is transmitted by liquids under pressure is known as hydraulic machine.
13. Pressure = Force /Area

CONCEPT MAP